ID 100 DV
The ID 100 DV is an Indirect Fired Oil heater is designed for use in places with limited ventilation or if you need heat in an area that has combustible material close by. The ID 100 DV will deliver huge volumes of safe, dry, fume - free heat. All our heaters are Tested to the highest safety and reliability standards.The ID 100 DV runs on 110 or 240v power supply.
What's it ideal for?
| Building Sites | Warehouses |
| Shops | Garages |
| Retail and car showrooms | Food prep areas |
| Exhibition halls | Clothing manufactures |
| Marquees | Sports halls and leisure centres |
| Factories | Churches |
| Agricultural Locations |
For spaces big or small?
The ID 100 DV will warm an area of 700m3 - 24,737 ft3
The ID 100 DV dimensions are 540 x 1,185 x 980mm and weighs 61kg
What's so good about it?
| Safe and easy to use | 12.9 hours heating on one 65 ltr tank |
| Robust construction | Very reliable |
| Quiet operation | Fume free |
| Economical | Totally portable |
| Runs on low cost fuel | Delivers large volumes of warm air |
Specification
| Nominal heating duty | 29 kW 98,948 btu |
| Air flow (max) | 1,764 m³/hr |
| Typical heated area | 700 m³ |
| Power supply | 230/110 V 1 ph 50 Hz Run 2.4/5 A |
| Plug type | BS1363 230 V BS4343 16 A 110 V |
| Noise level (max) | 72 dBA @ 1 metre |
| Weight | 61 kg |
| Dimensions (L x W x H) | 1,185 x 540 x 980 mm |
| Minimum flue | 1 metre x 127 mm |
| Duct length (max) | 5 metres |
| Duct size | 300 mm |
| Control | Automatic External Controls Available |
| Fuel type | Gas Oil or Kerosene |
| Fuel consumption | 4.4 kg/hr |
| Tank capacity | 65 litres |
| Hours run (max, with flue adapter) | 12.9 hrs/tank |