ID 35 DV
The ID 35 DV is an Indirect Fired Oil heater is designed for use in places with limited ventilation or if you need heat in an area that has combustible material close by. The ID 35 DV will deliver huge volumes of safe, dry, fume - free heat. All our heaters are Tested to the highest safety and reliability standards. The ID 35 DV runs on 110 or 240v power supply.
What's it ideal for?
| Building Sites | Warehouses |
| Shops | Garages |
| Retail and car showrooms | Food prep areas |
| Exhibition halls | Clothing manufactures |
| Marquees | Sports halls and leisure centres |
| Factories | Churches |
| Agricultural Locations |
For spaces big or small?
The ID 35 DV will warm an area of 974m3 - 34,400 ft3
The ID 35 DV dimensions are 580 x 1,250 x 1,050mm and weighs 82kg
What's so good about it?
| Safe and easy to use | 18 hours heating on one 46 ltr tank |
| Robust construction | Very reliable |
| Quiet operation | Direct fired |
| Economical | Totally portable |
| Runs on low cost fuel | Delivers large volumes of warm air |
Specification
| Specifications | |
| Nominal heating duty | 40 kW 137,600 btu |
| Air flow (max) | 2,050 m³/hr |
| Typical heated area | 974 m³ |
| Power supply | 230/110 V 1 ph 50 Hz Run 2.4/5 A |
| Plug type | BS1363 230 V BS4343 16 A 110 V |
| Noise level (max) | 70 dBA @ 1 metre |
| Weight | 75 kg |
| Dimensions (L x W x H) | 1,250 x 580 x 1,050 mm |
| Minimum flue | 1 metre x 127 mm |
| Maximum duct length | 3 metres |
| Duct diameter size | 300 mm |
| Control | Automatic External Controls Available |
| Fuel type | Gas Oil or Kerosene |
| Fuel consumption | 3.39 kg/hr |
| Tank capacity | 51 litres |
| Hours run (max, with flue adapter) | 13.3 hrs/tank |