ID 60 DV
The ID 60 DV is an Indirect Fired Oil heater is designed for use in places with limited ventilation or if you need heat in an area that has combustible material close by. The ID 60 DV will deliver huge volumes of safe, dry, fume - free heat. All our heaters are tested to the highest safety and reliability standards.
What's it ideal for?
| Building Sites | Warehouses |
| Shops | Garages |
| Retail and car showrooms | Food prep areas |
| Exhibition halls | Clothing manufactures |
| Marquees | Sports halls and leisure centres |
| Factories | Churches |
| Agricultural Locations |
For spaces big or small?
The ID 60 DV will warm an area of 1,500m3 - 51,186ft3
The ID 60 DV dimensions are 775 x 1,500 x 1,025mm and weighs 220kg
What's so good about it?
| Safe and easy to use | Delivers large volumes of warm air |
| Robust construction | Very reliable |
| Quiet operation | Fume free |
| Economical | Totally portable |
| Runs on low cost fuel |
Specification
| Nominal heating duty | 60kW 204,720 btu |
| Air flow (max) | 3,060 m³/hr |
| Typical heated area | 1,500 m³ |
| Power supply | 230/110 V 1 ph 50 Hz Run 6.2/15.1 A |
| Plug type | BS1363 230 V / BS4343 16 A 110 V |
| Noise level (max) | 73.3 dBA @ 1 metre |
| Weight | 220 kg |
| Dimensions (L x W x H) | 1,500 x 775 x 1,025 mm |
| Minimum flue | 600 x 127 mm |
| Maximum duct length | 30 metres |
| Duct diameter size | 300 mm |
| Control | Automatic External Controls Available |
| Fuel type | Gas Oil or Kerosene |
| Fuel consumption | 6.98 kg/hr |
| Tank capacity | See fuel buggy details on page 158 |