Model 160
The Model 160 is a Direct Fired oil heater, designed for use in well-ventilated areas. The Model 160 can be fuelled by either Gas oil or Kerosene and available with either 230 or 110 volt electric supply. The Model 160 is very reliable and delivers large volumes of warm air quickly and safely.
What's it ideal for?
| Factories | Garages |
| Warehouses | Farm buildings |
| Loading bays | Construction sites |
| Sports Halls |
For spaces big or small?
The Model 160 will warm an area of 1,130m3 - 40,000 ft3
The Model 160 dimensions are 564 x 1,028 x 546mm and it weighs 43kg
What's so good about it?
| Safe and easy to use | Direct fired |
| Economical | Delivers large volumes of warm air |
| Very reliable | Runs on low cost fuel |
| Quiet in operation | 8.5 hours heating on one 41 ltr tank |
| Totally portable |
Specification
| Nominal heating duty | 47 kW 160,364 btu |
| Air flow | 1,296 m³/hr |
| Typical heated area | 1,130 m³ |
| Power supply | 230/110 V 1 ph 50 Hz Run 2.5/5 A |
| Plug type | BS1363 230 V BS4343 16 A 110V |
| Noise level | 82.2 dBA @ 1 metre |
| Weight | 43 kg |
| Dimensions (L x W x H) | 1,028 x 546 x 546 mm |
| Control | Automatic External Controls Available |
| Fuel type | Gas Oil or Kerosene |
| Fuel consumption | 4.7 litres per hour |
| Tank capacity | 41 litres |
| Hours run | 8.5 hours per tank |