Model 300 TA
The Model 300 TA is a Direct Fired oil heater with a integral thermostat, designed for use in well-ventilated areas. The Model 300 TA can be fuelled by either Gas oil or Kerosene and available with either 230 volt electric supply. The Model 300 TA is very reliable and delivers large volumes of warm air quickly and safely.
What's it ideal for?
| Factories | Garages |
| Warehouses | Farm buildings |
| Loading bays | Churches |
| Sports Halls | Construction sites |
For spaces big or small?
The Model 300 TA will warm an area of 2,119m3 - 75,000 ft3
The Model 300 TA dimensions are 740 x 1397 x 940mm and weighs 82kg
What's so good about it?
| Safe and easy to use | Direct fired |
| Economical | Delivers large volumes of warm air |
| Very reliable | Runs on low cost fuel |
| Quiet in operation | 16.2 hours heating on one 137 ltr tank |
| Totally portable |
Specification
| Nominal heating duty | 88 kW 300,256 btu |
| Air flow (max) | 3,276 m³/hr |
| Typical heated area | 2,119 m³ |
| Power supply | 230/110 V 1 ph 50 Hz Run 2.7/5.5 A |
| Plug type | BS1363 230 V BS4343 16 A 110 V |
| Noise level (max) | 77.5 dBA @ 1 metre |
| Weight | 82 kg |
| Dimensions (L x W x H) | 1,397 x 740 x 940 mm |
| Control | Automatic External Controls Available |
| Fuel type | Gas Oil or Kerosene |
| Fuel consumption | 8.37 litres per hour |
| Tank capacity | 137 litres |
| Hours run | 16.1 hours per tank |