Model 40
The Model 40 is a Direct Fired oil heater, designed for use in well-ventilated areas. The Model 40 can be fuelled by either Gas oil or Kerosene and available with either 230 or 110 volt electric supply. The Model 40 is very reliable and delivers large volumes of warm air quickly and safely.
What's it ideal for?
| Factories | Garages |
| Warehouses | Farm buildings |
| Loading bays | Construction sites |
| Sports Halls |
For spaces big or small?
The Model 40 will warm an area of 1,050m3 - 37,000 ft3
The Model 40 dimensions are 560 x 930 x 615mm and weighs 37kg
What's so good about it?
| Safe and easy to use | Direct fired |
| Economical | Delivers large volumes of warm air |
| Very reliable | Runs on low cost fuel |
| Quiet in operation | 12 hours heating on one 46 ltr tank |
| Totally portable |
Specification
| Nominal heating duty | 43 kW 146,716 btu |
| Air flow | 1050 m³/hr |
| Typical heated area | 1050 m³ |
| Power supply | 230/110 V 1 ph 50 Hz Run 2/4.1 A |
| Plug type | BS1363 230v / BS4343 16A 110v |
| Noise level | 79 dBA @ 1 metre |
| Weight | 37 kg |
| Dimensions (L x W x H) | 930 x 560 x 615 mm |
| Control | Automatic External Controls Available |
| Fuel type | Gas Oil or Kerosene |
| Fuel consumption | 4.09 litres per hour |
| Tank capacity | 46 litres |
| Hours run | 11.2 hours per tank |